Teensy Installation and Multimeter Use
Please Log In for full access to the web site.
Note that this link will take you to an external site (https://shimmer.mit.edu) to authenticate, and then you will be redirected back to this page.
This problem requires picking up some hardware from us, specifically a little box (with a red lid) containing some hardware, and an orange multimeter. You can pick up a kit and a meter at your recitation section or during any open lab hour time in 38-530.
Your kit will be labeled with a number (on the box lid, on the side of the box, and again on the breadboard inside the kit). Please enter the number of the kit you grabbed in the box below: