Teensy Installation and Multimeter Use
Please Log In for full access to the web site.
Note that this link will take you to an external site (https://shimmer.mit.edu) to authenticate, and then you will be redirected back to this page.
This problem requires picking up some hardware from us, specifically a little box (with a red lid) containing some hardware, and an orange multimeter. You can pick up a kit and a meter at your recitation section or during any open lab hour time in 38-530 or 34-501.
Your kit will be labeled with a number (on the box lid, on the side of the box, and again on the breadboard inside the kit). After you've picked up a kit, please enter the number of the kit you grabbed in the box below: